• 802.11ac Dual Radio Smart Antenna 3×3 Access Point

• 802.11ac Dual Radio Smart Antenna 2×2 Access Point

• 802.11ac Dual Radio External antenna 2×2 Access Point

• 802.11ac Dual Radio External Antenna 3×3 Outdoor Access Point

WAC6503D-S and WAC6553D-E

• 802.11n: up to 450 Mbps in MCS23 (40 MHz)
• 802.11ac: up to 1300 Mbps in MCS9 (80 MHz)

WAC6502D-E and WAC6502D-S

• 802.11n: up to 300 Mbps in MCS15 (40 MHz)
• 802.11ac: up to 866 Mbps in MCS9 (80 MHz)

• WAC6503D-S / WAC6553D-E 3×3 MIMO with three spatial streams
• WAC6502D-S / WAC6502D-E 2×2 MIMO with two spatial streams
• Maximal Ratio Combining (MRC)
• 20-, 40- and 80-MHz channels
• Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
• Cyclic Delay Diversity (CSD) support
• Maximum Likelihood Demodulation (MLD) support
• Low Density Parity Check (LDPC) support

• WAC6503D-S: 6 embedded smart antenna with 4dBi gain at 2.4GHz and 6dBi gain at 5GHz
• WAC6502D-S: 4 embedded smart antenna with 4dBi gain at 2.4GHz and 6dBi gain at 5GHz
• WAC6502D-E: 4 external with 5dBi gain at 2.4GHz and 7dBi gain at 5GHz
• WWAC6553D-E: 6 N-type connectors *1

• Min. Rx sensitivity up to -102 dBm

• WAC6503D-S/WAC6553D-E Up to 900 Mbps
• WAC6502D-S/WAC6502D-E Up to 600 Mbps

• Supported WEP, WPA/WPA2-Enterprise, WMM (Wi-Fi certified) ,multiple EAP types, IEEE802.1X, MAC filtering, Layer-2 isolation , RADIUS authentication and more encryption supported when working with ZyXEL NXC controller series

• Support IPv6, VLANs, DHCP Client

• WMM, WMM power save, DiffServ marking

Discovery of ZyXEL switches, APs and gateways in local area network.

Centralized and batch configurations.

• IP configuration
• IP renew
• Device factory reset
• Device reboot
• Device locating
• Web GUI access
• Firmware upgrade
• Password configuration
• One-click quick association with ZyXEL AP Configurator (ZAC)

• Discover neighboring devices
• One-click remote management access to the neighboring ZyXEL devices

• Batch AP configuration
• Batch AP firmware upgrade
• Batch AP profile backup

• Wi-Fi AP Planning
• Wi-Fi coverage detection
• Wireless health management

• 2 gigabit port
• 1 RJ-45 serial console port
• Support 802.3at PoE for full functional operation

• DC input: 12 VDC 2 A
• PoE: 802.3at compliant (WAC6553D-E only support POE)

• IEEE 802.3
• IEEE 802.3u
• IEEE 802.11ab
• IEEE 802.3au
• IEEE 802.3az
• IEEE 802.3at

• IEEE 802.3at*3

• 802.11b: DBPSK, DQPSK, CCK
• 802.11g: BPSK, QPSK, 16-QAM, 64-QAM
• 802.11a: BPSK, QPSK, 16-QAM, 64-QAM
• 802.11n: BPSK, QPSK, 16-QAM, 64-QAM
• 802.11ac: BPSK, QPSK, 64-QAM, 256-QAM

• FCC Part 15C
• FCC Part 15E
• ETSI EN 300 328
• EN 301 893
• LP0002

• FCC Part 15B
• EN 301 489-1
• EN 301 489-17
• EN55022
• EN55024
• EN61000-3-2/-3
• EN60601-1-2
• BSMI CNS13438

• EN 60950-1
• IEC 60950-1
• BSMI CNS14336-1

WAC6503D-S,WAC6502D-S and WAC6502D-E

• 236 x 227 x 62mm / 9.28 x 8.95 x 2.43in. (WxDxH)

WAC6553D-E

• 255 x 256 x 62mm / 10.04 x 10.08 x 2.44in. (WxDxH)

• WAC6503D-S: 982g / 2.17lb.
• WAC6502D-S: 961g / 2.12lb.
• WAC6502D-E: 841g / 1.86lb.
• WAC6553D-E: 1708g / 3.77lb.

• IP66 enclosures with embedded heater for harsh weather (WAC6553D-E only)

WAC6503D-S andWAC6502D-S

• Temperature: 0°C to 50°C / 32°F to 122°F
• Humidity: 10% to 90% (non-condensing)

WAC6502D-E and WAC6553D-E

• Temperature: -20°C to 60°C / -4°F to 140°F
• Humidity: 10% to 95% (non-condensing)

WAC6503D-S & WAC6502D-S

• Temperature: 0°C to 50°C / 32°F to 122°F
• Humidity: 10% to 90% (non-condensing)

WAC6502D-E and WAC6553D-E

• Temperature: -20°C to 60°C / -4°F to 140°F
• Humidity: 10% to 95% (non-condensing)